Skip to main content

YAML Reference

This page lists all components, interpolation variables and interpolation macros that can be used when defining a low code YAML file.

For the technical JSON schema definition that low code manifests are validated against, see here.

Components​

DeclarativeSource object​

An API source that extracts data according to its declarative components.

Properties:

AddedFieldDefinition object​

Defines the field to add on a record.

Properties:

  • path array

    List of strings defining the path where to add the value on the record.

    Examples:
    [
  "segment_id"
]
    [
  "metadata",
  "segment_id"
]

  • value string

    Value of the new field. Use {{ record['existing_field'] }} syntax to refer to other fields in the record.

    Available variables:
    Examples:
    {{ record['updates'] }}
    {{ record['MetaData']['LastUpdatedTime'] }}
    {{ stream_partition['segment_id'] }}

  • value_type #/definitions/ValueType

    Type of the value. If not specified, the type will be inferred from the value.

  • $parameters object

    Set parameters that are inherited to all children. See the section in the advanced topics for more details.

AddFields object​

Transformation which adds field to an output record. The path of the added field can be nested.

Properties:

  • fields array

    List of transformations (path and corresponding value) that will be added to the record.

  • $parameters object

    Set parameters that are inherited to all children. See the section in the advanced topics for more details.

ApiKeyAuthenticator object​

Authenticator for requests authenticated with an API token injected as an HTTP request header.

Properties:

  • api_token string

    The API key to inject in the request. Fill it in the user inputs.

    Available variables:
    Examples:
    {{ config['api_key'] }}
    Token token={{ config['api_key'] }}

  • header string

    The name of the HTTP header that will be set to the API key. This setting is deprecated, use inject_into instead. Header and inject_into can not be defined at the same time.

    Available variables:
    Examples:
    Authorization
    Api-Token
    X-Auth-Token

  • inject_into #/definitions/RequestOption

    Configure how the API Key will be sent in requests to the source API. Either inject_into or header has to be defined.

    Examples:
    {
  "inject_into": "header",
  "field_name": "Authorization"
}
    {
  "inject_into": "request_parameter",
  "field_name": "authKey"
}

  • $parameters object

    Set parameters that are inherited to all children. See the section in the advanced topics for more details.

AuthFlow object​

Additional and optional specification object to describe what an 'advanced' Auth flow would need to function.

  • A connector should be able to fully function with the configuration as described by the ConnectorSpecification in a 'basic' mode.
  • The 'advanced' mode provides easier UX for the user with UI improvements and automations. However, this requires further setup on the server side by instance or workspace admins beforehand. The trade-off is that the user does not have to provide as many technical inputs anymore and the auth process is faster and easier to complete.
Properties:

  • auth_flow_type string

    The type of auth to use

  • predicate_key array

    JSON path to a field in the connectorSpecification that should exist for the advanced auth to be applicable.

    Example:
    [
  "credentials",
  "auth_type"
]

  • predicate_value string

    Value of the predicate_key fields for the advanced auth to be applicable.

    Example:
    Oauth

  • oauth_config_specification #/definitions/OAuthConfigSpecification

BasicHttpAuthenticator object​

Authenticator for requests authenticated with the Basic HTTP authentication scheme, which encodes a username and an optional password in the Authorization request header.

Properties:

  • username string

    The username that will be combined with the password, base64 encoded and used to make requests. Fill it in the user inputs.

    Available variables:
    Examples:
    {{ config['username'] }}
    {{ config['api_key'] }}

  • password string

    The password that will be combined with the username, base64 encoded and used to make requests. Fill it in the user inputs.

    Available variables:
    Examples:
    {{ config['password'] }}
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
BearerAuthenticator object​
Authenticator for requests authenticated with a bearer token injected as a request header of the form Authorization: Bearer <token>.
Properties:
  • api_token string
    Token to inject as request header for authenticating with the API.
    Available variables:
    Examples:
    {{ config['api_key'] }}
    {{ config['token'] }}
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
SelectiveAuthenticator object​
Authenticator that selects concrete authenticator based on config property.
Properties:
  • authenticator_selection_path array
    Path of the field in config with selected authenticator name
    Examples:
    [
  "auth"
]
    [
  "auth",
  "type"
]
  • authenticators object
    Authenticators to select from.
    Example:
    {
  "authenticators": {
    "token": "#/definitions/ApiKeyAuthenticator",
    "oauth": "#/definitions/OAuthAuthenticator",
    "jwt": "#/definitions/JwtAuthenticator"
  }
}
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CheckStream object​
Defines the streams to try reading when running a check operation.
Properties:
  • stream_names array
    Names of the streams to try reading from when running a check operation.
    Examples:
    [
  "users"
]
    [
  "users",
  "contacts"
]
CompositeErrorHandler object​
Error handler that sequentially iterates over a list of error handlers.
Properties:
  • error_handlers array
    List of error handlers to iterate on to determine how to handle a failed response.
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
ConcurrencyLevel object​
Defines the amount of parallelization for the streams that are being synced. The factor of parallelization is how many partitions or streams are synced at the same time. For example, with a concurrency_level of 10, ten streams or partitions of data will processed at the same time.
Properties:
  • default_concurrency
    The amount of concurrency that will applied during a sync. This value can be hardcoded or user-defined in the config if different users have varying volume thresholds in the target API.
    Type: 
    • integer
    • string

    Available variables:
    Examples:
    10
    {{ config['num_workers'] or 10 }}
  • max_concurrency integer
    The maximum level of concurrency that will be used during a sync. This becomes a required field when the default_concurrency derives from the config, because it serves as a safeguard against a user-defined threshold that is too high.
    Examples:
    20
    100
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
ConstantBackoffStrategy object​
Backoff strategy with a constant backoff interval.
Properties:
  • backoff_time_in_seconds
    Backoff time in seconds.
    Type: 
    • number
    • string

    Available variables:
    Examples:
    30
    30.5
    {{ config['backoff_time'] }}
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CursorPagination object​
Pagination strategy that evaluates an interpolated string to define the next page to fetch.
Properties:
  • cursor_value string
    Value of the cursor defining the next page to fetch.
    Available variables:
    Examples:
    {{ headers.link.next.cursor }}
    {{ last_record['key'] }}
    {{ response['nextPage'] }}
  • page_size integer
    The number of records to include in each pages.
    Example:
    100
  • stop_condition string
    Template string evaluating when to stop paginating.
    Available variables:
    Examples:
    {{ response.data.has_more is false }}
    {{ 'next' not in headers['link'] }}
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomAuthenticator object​
Authenticator component whose behavior is derived from a custom code implementation of the connector.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom authentication strategy. Has to be a sub class of DeclarativeAuthenticator. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.ShortLivedTokenAuthenticator
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomBackoffStrategy object​
Backoff strategy component whose behavior is derived from a custom code implementation of the connector.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom backoff strategy. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.MyCustomBackoffStrategy
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomErrorHandler object​
Error handler component whose behavior is derived from a custom code implementation of the connector.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom error handler. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.MyCustomErrorHandler
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomIncrementalSync object​
Incremental component whose behavior is derived from a custom code implementation of the connector.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom incremental sync. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.MyCustomIncrementalSync
  • cursor_field string
    The location of the value on a record that will be used as a bookmark during sync.
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomPaginationStrategy object​
Pagination strategy component whose behavior is derived from a custom code implementation of the connector.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom pagination strategy. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.MyCustomPaginationStrategy
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomRecordExtractor object​
Record extractor component whose behavior is derived from a custom code implementation of the connector.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom record extraction strategy. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.MyCustomRecordExtractor
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomRecordFilter object​
Record filter component whose behavior is derived from a custom code implementation of the connector.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom record filter strategy. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.MyCustomCustomRecordFilter
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomRequester object​
Requester component whose behavior is derived from a custom code implementation of the connector.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom requester strategy. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.MyCustomRecordExtractor
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomRetriever object​
Retriever component whose behavior is derived from a custom code implementation of the connector.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom retriever strategy. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.MyCustomRetriever
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomPartitionRouter object​
Partition router component whose behavior is derived from a custom code implementation of the connector.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom partition router. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.MyCustomPartitionRouter
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomSchemaLoader object​
Schema Loader component whose behavior is derived from a custom code implementation of the connector.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom schema loader. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.MyCustomSchemaLoader
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomStateMigration object​
Apply a custom transformation on the input state.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom state migration. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.MyCustomStateMigration
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
CustomTransformation object​
Transformation component whose behavior is derived from a custom code implementation of the connector.
Properties:
  • class_name string
    Fully-qualified name of the class that will be implementing the custom transformation. The format is source_<name>.<package>.<class_name>.
    Example:
    source_railz.components.MyCustomTransformation
  • $parameters object
    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
LegacyToPerPartitionStateMigration object​
Transforms the input state for per-partitioned streams from the legacy format to the low-code format. The cursor field and partition ID fields are automatically extracted from the stream's DatetimebasedCursor and SubstreamPartitionRouter.
Example input state: { "13506132": { "last_changed": "2022-12-27T08:34:39+00:00" } Example output state: { "partition": {"id": "13506132"}, "cursor": {"last_changed": "2022-12-27T08:34:39+00:00"} }
Properties:
    DatetimeBasedCursor object​
    Cursor to provide incremental capabilities over datetime.
    Properties:
    • cursor_field string
      The location of the value on a record that will be used as a bookmark during sync. To ensure no data loss, the API must return records in ascending order based on the cursor field. Nested fields are not supported, so the field must be at the top level of the record. You can use a combination of Add Field and Remove Field transformations to move the nested field to the top.
      Available variables:
      Examples:
      created_at
      {{ config['record_cursor'] }}
    • datetime_format string
      The datetime format used to format the datetime values that are sent in outgoing requests to the API. Use placeholders starting with "%" to describe the format the API is using. The following placeholders are available:
      

        

      • %s: Epoch unix timestamp - 1686218963
        • 

      • %s_as_float: Epoch unix timestamp in seconds as float with microsecond precision - 1686218963.123456
        • 

      • %ms: Epoch unix timestamp (milliseconds) - 1686218963123
        • 

      • %a: Weekday (abbreviated) - Sun
        • 

      • %A: Weekday (full) - Sunday
        • 

      • %w: Weekday (decimal) - 0 (Sunday), 6 (Saturday)
        • 

      • %d: Day of the month (zero-padded) - 01, 02, ..., 31
        • 

      • %b: Month (abbreviated) - Jan
        • 

      • %B: Month (full) - January
        • 

      • %m: Month (zero-padded) - 01, 02, ..., 12
        • 

      • %y: Year (without century, zero-padded) - 00, 01, ..., 99
        • 

      • %Y: Year (with century) - 0001, 0002, ..., 9999
        • 

      • %H: Hour (24-hour, zero-padded) - 00, 01, ..., 23
        • 

      • %I: Hour (12-hour, zero-padded) - 01, 02, ..., 12
        • 

      • %p: AM/PM indicator
        • 

      • %M: Minute (zero-padded) - 00, 01, ..., 59
        • 

      • %S: Second (zero-padded) - 00, 01, ..., 59
        • 

      • %f: Microsecond (zero-padded to 6 digits) - 000000
        • 

      • %z: UTC offset - (empty), +0000, -04:00
        • 

      • %Z: Time zone name - (empty), UTC, GMT
        • 

      • %j: Day of the year (zero-padded) - 001, 002, ..., 366
        • 

      • %U: Week number of the year (starting Sunday) - 00, ..., 53
        • 

      • %W: Week number of the year (starting Monday) - 00, ..., 53
        • 

      • %c: Date and time - Tue Aug 16 21:30:00 1988
        • 

      • %x: Date standard format - 08/16/1988
        • 

      • %X: Time standard format - 21:30:00
        • 

      • %%: Literal '%' character
        • 

      

      Some placeholders depend on the locale of the underlying system - in most cases this locale is configured as en/US. For more information see the Python documentation.
      Examples:
      %Y-%m-%dT%H:%M:%S.%f%z
      %Y-%m-%d
      %s
      %ms
      %s_as_float
    • start_datetime
      The datetime that determines the earliest record that should be synced.
      Type: 
      Available variables:
      Examples:
      2020-01-1T00:00:00Z
      {{ config['start_time'] }}
    • cursor_datetime_formats array
      The possible formats for the cursor field, in order of preference. The first format that matches the cursor field value will be used to parse it. If not provided, the datetime_format will be used.
    • cursor_granularity string
      Smallest increment the datetime_format has (ISO 8601 duration) that is used to ensure the start of a slice does not overlap with the end of the previous one, e.g. for %Y-%m-%d the granularity should be P1D, for %Y-%m-%dT%H:%M:%SZ the granularity should be PT1S. Given this field is provided, step needs to be provided as well.
      Example:
      PT1S
    • end_datetime
      The datetime that determines the last record that should be synced. If not provided, {{ now_utc() }} will be used.
      Type: 
      Available variables:
      Examples:
      2021-01-1T00:00:00Z
      {{ now_utc() }}
      {{ day_delta(-1) }}
    • end_time_option #/definitions/RequestOption
      Optionally configures how the end datetime will be sent in requests to the source API.
    • is_data_feed boolean
      A data feed API is an API that does not allow filtering and paginates the content from the most recent to the least recent. Given this, the CDK needs to know when to stop paginating and this field will generate a stop condition for pagination.
    • is_client_side_incremental boolean
      If the target API endpoint does not take cursor values to filter records and returns all records anyway, the connector with this cursor will filter out records locally, and only emit new records from the last sync, hence incremental. This means that all records would be read from the API, but only new records will be emitted to the destination.
    • is_compare_strictly boolean
      Set to True if the target API does not accept queries where the start time equal the end time.
    • global_substream_cursor boolean
      This setting optimizes performance when the parent stream has thousands of partitions by storing the cursor as a single value rather than per partition. Notably, the substream state is updated only at the end of the sync, which helps prevent data loss in case of a sync failure. See more info in the docs.
    • lookback_window string
      Time interval before the start_datetime to read data for, e.g. P1M for looking back one month.
      Available variables:
      Examples:
      P1D
      P{{ config['lookback_days'] }}D
    • partition_field_end string
      Name of the partition start time field.
      Example:
      ending_time
    • partition_field_start string
      Name of the partition end time field.
      Example:
      starting_time
    • start_time_option #/definitions/RequestOption
      Optionally configures how the start datetime will be sent in requests to the source API.
    • step string
      The size of the time window (ISO8601 duration). Given this field is provided, cursor_granularity needs to be provided as well.
      Examples:
      P1W
      {{ config['step_increment'] }}
    • $parameters object
      Set parameters that are inherited to all children. See the section in the advanced topics for more details.
    JwtAuthenticator object​
    Authenticator for requests using JWT authentication flow.
    Properties:
    • secret_key string
      Secret used to sign the JSON web token.
      Example:
      {{ config['secret_key'] }}
    • base64_encode_secret_key boolean
      When set to true, the secret key will be base64 encoded prior to being encoded as part of the JWT. Only set to "true" when required by the API.
    • algorithm string
      Algorithm used to sign the JSON web token.
      Examples:
      ES256
      HS256
      RS256
      {{ config['algorithm'] }}
    • token_duration integer
      The amount of time in seconds a JWT token can be valid after being issued.
      Examples:
      1200
      3600
    • header_prefix string
      The prefix to be used within the Authentication header.
      Examples:
      Bearer
      Basic
    • jwt_headers object
      JWT headers used when signing JSON web token.
    • additional_jwt_headers object
      Additional headers to be included with the JWT headers object.
    • jwt_payload object
      JWT Payload used when signing JSON web token.
    • additional_jwt_payload object
      Additional properties to be added to the JWT payload.
    • $parameters object
      Set parameters that are inherited to all children. See the section in the advanced topics for more details.
    OAuthAuthenticator object​
    Authenticator for requests using OAuth 2.0 authorization flow.
    Properties:
    • client_id string
      The OAuth client ID. Fill it in the user inputs.
      Examples:
      {{ config['client_id }}
      {{ config['credentials']['client_id }}
    • client_secret string
      The OAuth client secret. Fill it in the user inputs.
      Examples:
      {{ config['client_secret }}
      {{ config['credentials']['client_secret }}
    • refresh_token string
      Credential artifact used to get a new access token.
      Examples:
      {{ config['refresh_token'] }}
      {{ config['credentials]['refresh_token'] }}
    • token_refresh_endpoint string
      The full URL to call to obtain a new access token.
      Example:
      https://connect.squareup.com/oauth2/token
    • access_token_name string
      The name of the property which contains the access token in the response from the token refresh endpoint.
      Example:
      access_token
    • expires_in_name string
      The name of the property which contains the expiry date in the response from the token refresh endpoint.
      Example:
      expires_in
    • grant_type string
      Specifies the OAuth2 grant type. If set to refresh_token, the refresh_token needs to be provided as well. For client_credentials, only client id and secret are required. Other grant types are not officially supported.
      Examples:
      refresh_token
      client_credentials
    • refresh_request_body object
      Body of the request sent to get a new access token.
      Example:
      {
  "applicationId": "{{ config['application_id'] }}",
  "applicationSecret": "{{ config['application_secret'] }}",
  "token": "{{ config['token'] }}"
}
    • scopes array
      List of scopes that should be granted to the access token.
      Example:
      [
  "crm.list.read",
  "crm.objects.contacts.read",
  "crm.schema.contacts.read"
]
    • token_expiry_date string
      The access token expiry date.
      Examples:
      2023-04-06T07:12:10.421833+00:00
      1680842386
    • token_expiry_date_format string
      The format of the time to expiration datetime. Provide it if the time is returned as a date-time string instead of seconds.
      Example:
      %Y-%m-%d %H:%M:%S.%f+00:00
    • refresh_token_updater
      When the token updater is defined, new refresh tokens, access tokens and the access token expiry date are written back from the authentication response to the config object. This is important if the refresh token can only used once.
    • $parameters object
      Set parameters that are inherited to all children. See the section in the advanced topics for more details.
    DeclarativeStream object​
    A stream whose behavior is described by a set of declarative low code components.
    Properties:
    DefaultErrorHandler object​
    Component defining how to handle errors. Default behavior includes only retrying server errors (HTTP 5XX) and too many requests (HTTP 429) with an exponential backoff.
    Properties:
    • backoff_strategies array
      List of backoff strategies to use to determine how long to wait before retrying a retryable request.
    • max_retries integer
      The maximum number of time to retry a retryable request before giving up and failing.
      Examples:
      5
      0
      10
    • response_filters array #/definitions/HttpResponseFilter
      List of response filters to iterate on when deciding how to handle an error. When using an array of multiple filters, the filters will be applied sequentially and the response will be selected if it matches any of the filter's predicate.
    • $parameters object
      Set parameters that are inherited to all children. See the section in the advanced topics for more details.
    DefaultPaginator object​
    Default pagination implementation to request pages of results with a fixed size until the pagination strategy no longer returns a next_page_token.
    Properties:
    DpathExtractor object​
    Record extractor that searches a decoded response over a path defined as an array of fields.
    Properties:
    • field_path array
      List of potentially nested fields describing the full path of the field to extract. Use "*" to extract all values from an array. See more info in the docs.
      Examples:
      [
  "data"
]
      [
  "data",
  "records"
]
      [
  "data",
  "{{ parameters.name }}"
]
      [
  "data",
  "*",
  "record"
]
    • $parameters object
      Set parameters that are inherited to all children. See the section in the advanced topics for more details.
    ExponentialBackoffStrategy object​
    Backoff strategy with an exponential backoff interval. The interval is defined as factor * 2^attempt_count.
    Properties:
    • factor
      Multiplicative constant applied on each retry.
      Type: 
      • number
      • string

      Available variables:
      Examples:
      5
      5.5
      10
    • $parameters object
      Set parameters that are inherited to all children. See the section in the advanced topics for more details.
    SessionTokenAuthenticator object​
    Properties:
    • login_requester #/definitions/HttpRequester
      Description of the request to perform to obtain a session token to perform data requests. The response body is expected to be a JSON object with a session token property.
      Example:
      {
  "type": "HttpRequester",
  "url_base": "https://my_api.com",
  "path": "/login",
  "authenticator": {
    "type": "BasicHttpAuthenticator",
    "username": "{{ config.username }}",
    "password": "{{ config.password }}"
  }
}
    • session_token_path array
      The path in the response body returned from the login requester to the session token.
      Examples:
      [
  "access_token"
]
      [
  "result",
  "token"
]
    • expiration_duration string
      The duration in ISO 8601 duration notation after which the session token expires, starting from the time it was obtained. Omitting it will result in the session token being refreshed for every request.
      Examples:
      PT1H
      P1D
    • request_authentication
      Authentication method to use for requests sent to the API, specifying how to inject the session token.
      Type: 
    • decoder
      Component used to decode the response.
      Type: 
    • $parameters object
      Set parameters that are inherited to all children. See the section in the advanced topics for more details.
    SessionTokenRequestApiKeyAuthenticator object​
    Authenticator for requests using the session token as an API key that's injected into the request.
    Properties:
    • inject_into #/definitions/RequestOption
      Configure how the API Key will be sent in requests to the source API.
      Examples:
      {
  "inject_into": "header",
  "field_name": "Authorization"
}
      {
  "inject_into": "request_parameter",
  "field_name": "authKey"
}
    SessionTokenRequestBearerAuthenticator​
    Authenticator for requests using the session token as a standard bearer token.
    Properties:
      HttpRequester object​
      Requester submitting HTTP requests and extracting records from the response.
      Properties:
      HttpResponseFilter object​
      A filter that is used to select on properties of the HTTP response received. When used with additional filters, a response will be selected if it matches any of the filter's criteria.
      Properties:
      • action string
        Action to execute if a response matches the filter.
        Examples:
        SUCCESS
        FAIL
        RETRY
        IGNORE
        RATE_LIMITED
      • failure_type string
        Failure type of traced exception if a response matches the filter.
        Examples:
        system_error
        config_error
        transient_error
      • error_message string
        Error Message to display if the response matches the filter.
        Available variables:
      • error_message_contains string
        Match the response if its error message contains the substring.
      • http_codes array
        Match the response if its HTTP code is included in this list.
        Examples:
        [
  420,
  429
]
        [
  500
]
      • predicate string
        Match the response if the predicate evaluates to true.
        Available variables:
        Examples:
        {{ 'Too much requests' in response }}
        {{ 'error_code' in response and response['error_code'] == 'ComplexityException' }}
      • $parameters object
        Set parameters that are inherited to all children. See the section in the advanced topics for more details.
      InlineSchemaLoader object​
      Loads a schema that is defined directly in the manifest file.
      Properties:
      • schema object
        Describes a streams' schema. Refer to the <a href="https://docs.airbyte.com/understanding-airbyte/supported-data-types/">Data Types documentation</a> for more details on which types are valid.
      JsonFileSchemaLoader object​
      Loads the schema from a json file.
      Properties:
      • file_path string
        Path to the JSON file defining the schema. The path is relative to the connector module's root.
        Available variables:
      • $parameters object
        Set parameters that are inherited to all children. See the section in the advanced topics for more details.
      JsonDecoder object​
      Properties:
        JsonlDecoder object​
        Use this if the response consists of JSON objects separated by new lines (\n) in JSONL format.
        Properties:
          KeysToLower object​
          A transformation that renames all keys to lower case.
          Properties:
          IterableDecoder object​
          Use this if the response consists of strings separated by new lines (\n). The Decoder will wrap each row into a JSON object with the record key.
          Properties:
            XmlDecoder object​
            Use this is the response is XML.
            Properties:
              ListPartitionRouter object​
              A Partition router that specifies a list of attributes where each attribute describes a portion of the complete data set for a stream. During a sync, each value is iterated over and can be used as input to outbound API requests.
              Properties:
              • cursor_field string
                While iterating over list values, the name of field used to reference a list value. The partition value can be accessed with string interpolation. e.g. "{{ stream_partition['my_key'] }}" where "my_key" is the value of the cursor_field.
                Available variables:
                Examples:
                section
                {{ config['section_key'] }}
              • values
                The list of attributes being iterated over and used as input for the requests made to the source API.
                Type: 
                • string
                • array

                Available variables:
                Examples:
                [
  "section_a",
  "section_b",
  "section_c"
]
                {{ config['sections'] }}
              • request_option #/definitions/RequestOption
                A request option describing where the list value should be injected into and under what field name if applicable.
              • $parameters object
                Set parameters that are inherited to all children. See the section in the advanced topics for more details.
              MinMaxDatetime object​
              Compares the provided date against optional minimum or maximum times. The max_datetime serves as the ceiling and will be returned when datetime exceeds it. The min_datetime serves as the floor.
              Properties:
              • datetime string
                Datetime value.
                Available variables:
                Examples:
                2021-01-01
                2021-01-01T00:00:00Z
                {{ config['start_time'] }}
              • datetime_format string
                Format of the datetime value. Defaults to "%Y-%m-%dT%H:%M:%S.%f%z" if left empty. Use placeholders starting with "%" to describe the format the API is using. The following placeholders are available:
                

                  

                • %s: Epoch unix timestamp - 1686218963
                  • 

                • %s_as_float: Epoch unix timestamp in seconds as float with microsecond precision - 1686218963.123456
                  • 

                • %ms: Epoch unix timestamp - 1686218963123
                  • 

                • %a: Weekday (abbreviated) - Sun
                  • 

                • %A: Weekday (full) - Sunday
                  • 

                • %w: Weekday (decimal) - 0 (Sunday), 6 (Saturday)
                  • 

                • %d: Day of the month (zero-padded) - 01, 02, ..., 31
                  • 

                • %b: Month (abbreviated) - Jan
                  • 

                • %B: Month (full) - January
                  • 

                • %m: Month (zero-padded) - 01, 02, ..., 12
                  • 

                • %y: Year (without century, zero-padded) - 00, 01, ..., 99
                  • 

                • %Y: Year (with century) - 0001, 0002, ..., 9999
                  • 

                • %H: Hour (24-hour, zero-padded) - 00, 01, ..., 23
                  • 

                • %I: Hour (12-hour, zero-padded) - 01, 02, ..., 12
                  • 

                • %p: AM/PM indicator
                  • 

                • %M: Minute (zero-padded) - 00, 01, ..., 59
                  • 

                • %S: Second (zero-padded) - 00, 01, ..., 59
                  • 

                • %f: Microsecond (zero-padded to 6 digits) - 000000, 000001, ..., 999999
                  • 

                • %z: UTC offset - (empty), +0000, -04:00
                  • 

                • %Z: Time zone name - (empty), UTC, GMT
                  • 

                • %j: Day of the year (zero-padded) - 001, 002, ..., 366
                  • 

                • %U: Week number of the year (Sunday as first day) - 00, 01, ..., 53
                  • 

                • %W: Week number of the year (Monday as first day) - 00, 01, ..., 53
                  • 

                • %c: Date and time representation - Tue Aug 16 21:30:00 1988
                  • 

                • %x: Date representation - 08/16/1988
                  • 

                • %X: Time representation - 21:30:00
                  • 

                • %%: Literal '%' character
                  • 

                

                Some placeholders depend on the locale of the underlying system - in most cases this locale is configured as en/US. For more information see the Python documentation.
                Examples:
                %Y-%m-%dT%H:%M:%S.%f%z
                %Y-%m-%d
                %s
              • max_datetime string
                Ceiling applied on the datetime value. Must be formatted with the datetime_format field.
                Available variables:
                Examples:
                2021-01-01T00:00:00Z
                2021-01-01
              • min_datetime string
                Floor applied on the datetime value. Must be formatted with the datetime_format field.
                Available variables:
                Examples:
                2010-01-01T00:00:00Z
                2010-01-01
              • $parameters object
                Set parameters that are inherited to all children. See the section in the advanced topics for more details.
              NoAuth object​
              Authenticator for requests requiring no authentication.
              Properties:
              NoPagination object​
              Pagination implementation that never returns a next page.
              Properties:
                OAuthConfigSpecification object​
                Specification describing how an 'advanced' Auth flow would need to function.
                Properties:
                • oauth_user_input_from_connector_config_specification object
                  OAuth specific blob. This is a Json Schema used to validate Json configurations used as input to OAuth.
Must be a valid non-nested JSON that refers to properties from ConnectorSpecification.connectionSpecification
using special annotation 'path_in_connector_config'.
These are input values the user is entering through the UI to authenticate to the connector, that might also shared
as inputs for syncing data via the connector.
Examples:
if no connector values is shared during oauth flow, oauth_user_input_from_connector_config_specification=[]
if connector values such as 'app_id' inside the top level are used to generate the API url for the oauth flow,
oauth_user_input_from_connector_config_specification={
app_id: {
type: string
path_in_connector_config: ['app_id']
}
}
if connector values such as 'info.app_id' nested inside another object are used to generate the API url for the oauth flow,
oauth_user_input_from_connector_config_specification={
app_id: {
type: string
path_in_connector_config: ['info', 'app_id']
}
}
                  Examples:
                  {
  "app_id": {
    "type": "string",
    "path_in_connector_config": [
      "app_id"
    ]
  }
}
                  {
  "app_id": {
    "type": "string",
    "path_in_connector_config": [
      "info",
      "app_id"
    ]
  }
}
                • complete_oauth_output_specification object
                  OAuth specific blob. This is a Json Schema used to validate Json configurations produced by the OAuth flows as they are
returned by the distant OAuth APIs.
Must be a valid JSON describing the fields to merge back to ConnectorSpecification.connectionSpecification.
For each field, a special annotation path_in_connector_config can be specified to determine where to merge it,
Examples:
complete_oauth_output_specification={
refresh_token: {
type: string,
path_in_connector_config: ['credentials', 'refresh_token']
}
}
                  Example:
                  {
  "refresh_token": {
    "type": "string,",
    "path_in_connector_config": [
      "credentials",
      "refresh_token"
    ]
  }
}
                • complete_oauth_server_input_specification object
                  OAuth specific blob. This is a Json Schema used to validate Json configurations persisted as Airbyte Server configurations.
Must be a valid non-nested JSON describing additional fields configured by the Airbyte Instance or Workspace Admins to be used by the
server when completing an OAuth flow (typically exchanging an auth code for refresh token).
Examples:
complete_oauth_server_input_specification={
client_id: {
type: string
},
client_secret: {
type: string
}
}
                  Example:
                  {
  "client_id": {
    "type": "string"
  },
  "client_secret": {
    "type": "string"
  }
}
                • complete_oauth_server_output_specification object
                  OAuth specific blob. This is a Json Schema used to validate Json configurations persisted as Airbyte Server configurations that
also need to be merged back into the connector configuration at runtime.
This is a subset configuration of complete_oauth_server_input_specification that filters fields out to retain only the ones that
are necessary for the connector to function with OAuth. (some fields could be used during oauth flows but not needed afterwards, therefore
they would be listed in the complete_oauth_server_input_specification but not complete_oauth_server_output_specification)
Must be a valid non-nested JSON describing additional fields configured by the Airbyte Instance or Workspace Admins to be used by the
connector when using OAuth flow APIs.
These fields are to be merged back to ConnectorSpecification.connectionSpecification.
For each field, a special annotation path_in_connector_config can be specified to determine where to merge it,
Examples:
complete_oauth_server_output_specification={
client_id: {
type: string,
path_in_connector_config: ['credentials', 'client_id']
},
client_secret: {
type: string,
path_in_connector_config: ['credentials', 'client_secret']
}
}
                  Example:
                  {
  "client_id": {
    "type": "string,",
    "path_in_connector_config": [
      "credentials",
      "client_id"
    ]
  },
  "client_secret": {
    "type": "string,",
    "path_in_connector_config": [
      "credentials",
      "client_secret"
    ]
  }
}
                OffsetIncrement object​
                Pagination strategy that returns the number of records reads so far and returns it as the next page token.
                Properties:
                • page_size
                  The number of records to include in each pages.
                  Type: 
                  • integer
                  • string

                  Available variables:
                  Examples:
                  100
                  {{ config['page_size'] }}
                • inject_on_first_request boolean
                  Using the offset with value 0 during the first request
                • $parameters object
                  Set parameters that are inherited to all children. See the section in the advanced topics for more details.
                PageIncrement object​
                Pagination strategy that returns the number of pages reads so far and returns it as the next page token.
                Properties:
                • page_size
                  The number of records to include in each pages.
                  Type: 
                  • integer
                  • string

                  Available variables:
                  Examples:
                  100
                  100
                  {{ config['page_size'] }}
                • start_from_page integer
                  Index of the first page to request.
                  Examples:
                  0
                  1
                • inject_on_first_request boolean
                  Using the page number with value defined by start_from_page during the first request
                • $parameters object
                  Set parameters that are inherited to all children. See the section in the advanced topics for more details.
                ParentStreamConfig object​
                Describes how to construct partitions from the records retrieved from the parent stream..
                Properties:
                • parent_key string
                  The primary key of records from the parent stream that will be used during the retrieval of records for the current substream. This parent identifier field is typically a characteristic of the child records being extracted from the source API.
                  Examples:
                  id
                  {{ config['parent_record_id'] }}
                • stream #/definitions/DeclarativeStream
                  Reference to the parent stream.
                • partition_field string
                  While iterating over parent records during a sync, the parent_key value can be referenced by using this field.
                  Examples:
                  parent_id
                  {{ config['parent_partition_field'] }}
                • request_option #/definitions/RequestOption
                  A request option describing where the parent key value should be injected into and under what field name if applicable.
                • incremental_dependency boolean
                  Indicates whether the parent stream should be read incrementally based on updates in the child stream.
                • extra_fields array
                  Array of field paths to include as additional fields in the stream slice. Each path is an array of strings representing keys to access fields in the respective parent record. Accessible via stream_slice.extra_fields. Missing fields are set to None.
                  Available variables:
                • $parameters object
                  Set parameters that are inherited to all children. See the section in the advanced topics for more details.
                PrimaryKey​
                The stream field to be used to distinguish unique records. Can either be a single field, an array of fields representing a composite key, or an array of arrays representing a composite key where the fields are nested fields.
                Examples:
                id
                [
  "code",
  "type"
]
                RecordFilter object​
                Filter applied on a list of records.
                Properties:
                RecordSelector object​
                Responsible for translating an HTTP response into a list of records by extracting records from the response and optionally filtering records based on a heuristic.
                Properties:
                SchemaNormalization string​
                Responsible for normalization according to the schema.
                Examples:
                None
                Default
                RemoveFields object​
                A transformation which removes fields from a record. The fields removed are designated using FieldPointers. During transformation, if a field or any of its parents does not exist in the record, no error is thrown.
                Properties:
                • condition string
                  The predicate to filter a property by a property value. Property will be removed if it is empty OR expression is evaluated to True.,
                  Available variables:
                  Examples:
                  {{ property|string == '' }}
                  {{ property is integer }}
                  {{ property|length > 5 }}
                  {{ property == 'some_string_to_match' }}
                • field_pointers array
                  Array of paths defining the field to remove. Each item is an array whose field describe the path of a field to remove.
                  Examples:
                  [
  "tags"
]
                  [
  [
    "content",
    "html"
  ],
  [
    "content",
    "plain_text"
  ]
]
                RequestPath object​
                Specifies where in the request path a component's value should be inserted.
                Properties:
                  RequestOption object​
                  Specifies the key field and where in the request a component's value should be injected.
                  Properties:
                  • field_name string
                    Configures which key should be used in the location that the descriptor is being injected into
                    Available variables:
                    Example:
                    segment_id
                  • inject_into
                    Configures where the descriptor should be set on the HTTP requests. Note that request parameters that are already encoded in the URL path will not be duplicated.
                    Examples:
                    request_parameter
                    header
                    body_data
                    body_json
                  Schemas object​
                  The stream schemas representing the shape of the data emitted by the stream.
                  LegacySessionTokenAuthenticator object​
                  Deprecated - use SessionTokenAuthenticator instead. Authenticator for requests authenticated using session tokens. A session token is a random value generated by a server to identify a specific user for the duration of one interaction session.
                  Properties:
                  • header string
                    The name of the session token header that will be injected in the request
                    Example:
                    X-Session
                  • login_url string
                    Path of the login URL (do not include the base URL)
                    Example:
                    session
                  • session_token string
                    Session token to use if using a pre-defined token. Not needed if authenticating with username + password pair
                  • session_token_response_key string
                    Name of the key of the session token to be extracted from the response
                    Example:
                    id
                  • username string
                    Username used to authenticate and obtain a session token
                    Example:
                     {{ config['username'] }}
                  • password string
                    Password used to authenticate and obtain a session token
                    Examples:
                    {{ config['password'] }}
                  • validate_session_url string
                    Path of the URL to use to validate that the session token is valid (do not include the base URL)
                    Example:
                    user/current
                  • $parameters object
                    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
                  SimpleRetriever object​
                  Retrieves records by synchronously sending requests to fetch records. The retriever acts as an orchestrator between the requester, the record selector, the paginator, and the partition router.
                  Properties:
                  AsyncJobStatusMap object​
                  Matches the api job status to Async Job Status.
                  Properties:
                  • running array
                  • completed array
                  • failed array
                  • timeout array
                  AsyncRetriever object​
                  Retrieves records by Asynchronously sending requests to fetch records. The retriever acts as an orchestrator between the requester, the record selector, the paginator, and the partition router.
                  Properties:
                  Spec object​
                  A source specification made up of connector metadata and how it can be configured.
                  Properties:
                  • connection_specification object
                    A connection specification describing how a the connector can be configured.
                  • documentation_url string
                    URL of the connector's documentation page.
                    Example:
                    https://docs.airbyte.com/integrations/sources/dremio
                  • advanced_auth #/definitions/AuthFlow
                    Advanced specification for configuring the authentication flow.
                  SubstreamPartitionRouter object​
                  Partition router that is used to retrieve records that have been partitioned according to records from the specified parent streams. An example of a parent stream is automobile brands and the substream would be the various car models associated with each branch.
                  Properties:
                  • parent_stream_configs array #/definitions/ParentStreamConfig
                    Specifies which parent streams are being iterated over and how parent records should be used to partition the child stream data set.
                  • $parameters object
                    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
                  ValueType string​
                  A schema type.
                  WaitTimeFromHeader object​
                  Extract wait time from a HTTP header in the response.
                  Properties:
                  • header string
                    The name of the response header defining how long to wait before retrying.
                    Available variables:
                    Example:
                    Retry-After
                  • regex string
                    Optional regex to apply on the header to extract its value. The regex should define a capture group defining the wait time.
                    Example:
                    ([-+]?\d+)
                  • max_waiting_time_in_seconds number
                    Given the value extracted from the header is greater than this value, stop the stream.
                    Example:
                    3600
                  • $parameters object
                    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
                  WaitUntilTimeFromHeader object​
                  Extract time at which we can retry the request from response header and wait for the difference between now and that time.
                  Properties:
                  • header string
                    The name of the response header defining how long to wait before retrying.
                    Available variables:
                    Example:
                    wait_time
                  • min_wait
                    Minimum time to wait before retrying.
                    Type: 
                    • number
                    • string

                    Available variables:
                    Examples:
                    10
                    60
                  • regex string
                    Optional regex to apply on the header to extract its value. The regex should define a capture group defining the wait time.
                    Available variables:
                    Example:
                    ([-+]?\d+)
                  • $parameters object
                    Set parameters that are inherited to all children. See the section in the advanced topics for more details.
                  Interpolation variables​
                  All string properties that list out available variables allow jinja expressions. They can be used by placing them in double curly braces: {{ config.property }}. The following variables are available
                  config object​
                  The connector configuration. The object's keys are the same as the the keys defined in the connection specification.
                  Example:
                  {
  "start_date": "2010-01-01",
  "api_key": "*****"
}
                  parameters object​
                  Additional runtime parameters, to be used for string interpolation. Parameters can be passed down from a parent component to its subcomponents using the $parameters key. This can be used to avoid repetitions.
                  Example:
                  {
  "path": "automations",
  "data_export_path": "automations",
  "cursor_field": "updated_at"
}
                  headers object​
                  The HTTP headers from the last response received from the API. The object's keys are the header names from the response.
                  Example:
                  {
  "Server": "nginx",
  "Date": "Mon, 24 Apr 2023 20:17:21 GMT",
  "Content-Type": "application/json",
  "Content-Length": "420",
  "Connection": "keep-alive",
  "referrer-policy": "strict-origin-when-cross-origin",
  "x-content-type-options": "nosniff",
  "x-ratelimit-limit": "600",
  "x-ratelimit-remaining": "598",
  "x-ratelimit-reset": "39"
}
                  last_record object​
                  Last record extracted from the response received from the API.
                  Example:
                  {
  "name": "Test List: 19",
  "id": "0236d6d2",
  "contact_count": 20,
  "_metadata": {
    "self": "https://api.sendgrid.com/v3/marketing/lists/0236d6d2"
  }
}
                  last_page_size object​
                  Number of records extracted from the last response received from the API.
                  Example:
                  2
                  next_page_token object​
                  Object describing the token to fetch the next page of records. The object has a single key "next_page_token".
                  Examples:
                  {
  "next_page_token": 3
}
                  {
  "next_page_token": "https://api.sendgrid.com/v3/marketing/lists/0236d6d2-75d2-42c5-962d-603e0deaf8d1"
}
                  record object​
                  The record being processed. The object's keys are the same keys as the records produced by the RecordSelector.
                  response object​
                  The body of the last response received from the API. The object's keys are the same keys as the response body's.
                  Example:
                  {
  "result": [
    {
      "name": "Test List: 19",
      "id": "0236d6d2-75d2-42c5-962d-603e0deaf8d1",
      "contact_count": 20,
      "_metadata": {
        "self": "https://api.sendgrid.com/v3/marketing/lists/0236d6d2"
      }
    }
  ],
  "_metadata": {
    "self": "https://api.sendgrid.com/v3/marketing/lists?page_size=1&page_token=",
    "next": "https://api.sendgrid.com/v3/marketing/lists?page_size=1&page_token=0236d6d2",
    "count": 82
  }
}
                  stream_interval object​
                  The current stream interval being processed. The keys are defined by the incremental sync component. Default keys are start_time and end_time.
                  Example:
                  {
  "start_time": "2020-01-01 00:00:00.000+00:00",
  "end_time": "2020-01-02 00:00:00.000+00:00"
}
                  stream_partition object​
                  The current stream partition being processed. The keys are defined by the partition router component.
                  Examples:
                  {
  "survey_id": 1234
}
                  {
  "strategy": "DESKTOP"
}
                  {
  "survey_id": 1234,
  "strategy": "MOBILE"
}
                  stream_slice object​
                  This variable is deprecated. Use stream_interval or stream_partition instead.
                  stream_state object​
                  The current state of the stream. The object's keys are defined by the incremental sync's cursor_field the and partition router's values.
                  Examples:
                  {
  "created_at": "2020-01-01 00:00:00.000+00:00"
}
                  {
  "updated_at": "2020-01-02 00:00:00.000+00:00"
}
                  Interpolation macros​
                  Besides referencing variables, the following macros can be called as part of jinja expressions, for example like this: {{ now_utc() }}.
                  Now (UTC)​
                  Returns the current date and time in the UTC timezone.
                  Examples:
                  '{{ now_utc() }}' -> '2021-09-01 00:00:00+00:00'
                  '{{ now_utc().strftime('%Y-%m-%d') }}' -> '2021-09-01'
                  Today (UTC)​
                  Returns the current date in UTC timezone. The output is a date object.
                  Examples:
                  '{{ today_utc() }}' -> '2021-09-01'
                  '{{ today_utc().strftime('%Y/%m/%d')}}' -> '2021/09/01'
                  Timestamp​
                  Converts a number or a string representing a datetime (formatted as ISO8601) to a timestamp. If the input is a number, it is converted to an int. If no timezone is specified, the string is interpreted as UTC.
                  Arguments: 
                  • datetime: A string formatted as ISO8601 or an integer representing a unix timestamp
                  Examples:
                  '{{ timestamp(1646006400) }}' -> 1646006400
                  '{{ timestamp('2022-02-28') }}' -> 1646006400
                  '{{ timestamp('2022-02-28T00:00:00Z') }}' -> 1646006400
                  '{{ timestamp('2022-02-28 00:00:00Z') }}' -> 1646006400
                  '{{ timestamp('2022-02-28T00:00:00-08:00') }}' -> 1646035200
                  Max​
                  Returns the largest object of a iterable, or or two or more arguments.
                  Arguments: 
                  • args: iterable or a sequence of two or more arguments
                  Examples:
                  '{{ max(2, 3) }}' -> 3
                  '{{ max([2, 3]) }}' -> 3
                  Day Delta​
                  Returns the datetime of now() + num_days.
                  Arguments: 
                  • num_days: The number of days to add to now
                  • format: How to format the output string
                  Examples:
                  '{{ day_delta(1) }}' -> '2021-09-02T00:00:00.000000+0000'
                  '{{ day_delta(-1) }}' -> '2021-08-31:00:00.000000+0000'
                  '{{ day_delta(25, format='%Y-%m-%d') }}' -> '2021-09-02'
                  Duration​
                  Converts an ISO8601 duratioin to datetime.timedelta.
                  Arguments: 
                  • duration_string: A string representing an ISO8601 duration. See https://www.digi.com/resources/documentation/digidocs//90001488-13/reference/r_iso_8601_duration_format.htm for more details.
                  Examples:
                  '{{ duration('P1D') }}' -> '1 day, 0:00:00'
                  '{{ duration('P6DT23H') }}' -> '6 days, 23:00:00'
                  '{{ (now_utc() - duration('P1D')).strftime('%Y-%m-%dT%H:%M:%SZ') }}' -> '2021-08-31T00:00:00Z'
                  Format Datetime​
                  Converts a datetime or a datetime-string to the specified format.
                  Arguments: 
                  • datetime: The datetime object or a string to convert. If datetime is a string, it must be formatted as ISO8601.
                  • format: The datetime format.
                  • input_format: (optional) The datetime format in the case it is an string.
                  Examples:
                  {{ format_datetime(config['start_time'], '%Y-%m-%d') }}
                  {{ format_datetime(config['start_date'], '%Y-%m-%dT%H:%M:%S.%fZ') }}
                  {{ format_datetime(config['start_date'], '%Y-%m-%dT%H:%M:%S.%fZ', '%a, %d %b %Y %H:%M:%S %z') }}
                  Interpolation filters​
                  The following filters can be called as part of jinja expressions, for example like this: {{  1 | string  }}.
                  Hash​
                  Convert the specified value to a hashed string.
                  Arguments: 
                  • hash_type: Valid hash type for converts ('md5' as default value).
                  • salt: An additional value to further protect sensitive data.
                  Examples:
                  {{ 'Test client_secret' | hash() }} -> '3032d57a12f76b61a820e47b9a5a0cbb'
                  {{ 'Test client_secret' | hash('md5') }} -> '3032d57a12f76b61a820e47b9a5a0cbb'
                  {{ 'Test client_secret' | hash('md5', salt='salt') }} -> '5011a0168579c2d94cbbe1c6ad14327c'
                  Base64 encoder​
                  Convert the specified value to a string in the base64 format.
                  Example:
                  {{ 'Test client_secret' | base64encode }} -> 'VGVzdCBjbGllbnRfc2VjcmV0'
                  Base64 decoder​
                  Decodes the specified base64 format value into a common string.
                  Example:
                  {{ 'ZmFrZSByZWZyZXNoX3Rva2VuIHZhbHVl' | base64decode }} -> 'fake refresh_token value'
                  String​
                  Converts the specified value to a string.
                  Examples:
                  {{ 1 | string }} -> "1"
                  {{ ["hello", "world" | string }} -> "["hello", "world"]"
                  Match the input string against a regular expression and return the first match.
                  Arguments: 
                  • regex: The regular expression to search for. It must include a capture group.
                  Example:
                  {{ "goodbye, cruel world" | regex_search("goodbye,\s(.*)$") }} -> "cruel world"
                  Was this page helpful?